The Runswick is an inset stove, designed so that it is usually possible to install the stove without removing the existing fire back or boiler, without a lot of building work or alterations to the existing fireplace. The Runswick will transform a room by bringing the advantages of a stove, with the minimum upheaval.
There will be a marked improvement in efficiency, together with the peace of mind and safety of a stove. As well as radiant heat from the front of the stove, the Runswick draws in cold air from the room at each side of the front frame, this air is then warmed and convected out through the vents above the door, total output being 4kW.
Runswick – Key Facts
|Maximum heat output||4kW|
|High efficiency heating||Wood: 79.9% – Smokeless fuel: 74.8%|
|Suitability||Conventional chimney, or with a 6” adaptor to flueliner|
|Maximum log length||300mm|
|Riddling Grate/ Stainless Steel Ashpan||Yes|
|Brass or St/Steel Fittings||Yes|